Touch Screen Manufacturer — Capacitive, LCD and Industrial Touch Screens

Touch screen lines at a glance

The catalogue is organised around five store categories — PCAP and TFT screens, industrial touch panels, capacitive touch displays, TFT touch screens and mirror touch screens — together with the website's main lines: capacitive touch screens, LCD displays, fully laminated touch modules, industrial serial touch screens, interface driver boards and structural parts. Each line below leads to a category page where the scope of that line is described in plain terms.

Pages describe categories, options and the points a buyer should confirm before ordering, because touch screens are configured around the application: the cover glass shape, the optical treatment, the bonding method and the controller interface all change with the end use.

What buyers confirm before ordering

Before placing an order, buyers are asked to confirm the points that decide whether a touch screen fits: the cover glass shape and optical treatment, the bonding method, the controller board interface, the operating environment, and the quantity and delivery schedule. Describe your application and confirm the required configuration before ordering.

For quantities and lead times, please confirm the minimum order quantity and the delivery schedule before payment. For certificates, please ask for the documents you need and confirm them before ordering. Certificates available upon request.

• Confirm the cover glass shape, size range and optical treatment for your application
• Confirm the bonding method: full lamination or frame lamination
• Confirm the controller board and interface your system requires
• Confirm the operating environment, including gloves, water or oil exposure
• Confirm the minimum order quantity and delivery schedule before payment

Technology notes for buyers

Start with the projected capacitive technology page, which explains how PCAP touch works in general terms, and the bonding guide, which compares full lamination with frame lamination so buyers can see the trade-offs before choosing. The cover glass guide covers shapes and AG, AR and AF optical treatments at the same category level.

The company website describes glove-use and wet-environment features.

Lines in detail

Capacitive touch screens are the default line for interfaces where a light touch and gestures matter, and the projected capacitive pages explain the sensor, the glass and the controller behind them. LCD touch screens pair a liquid-crystal display with a touch surface, and the TFT wording on that page names the same family from the panel-technology angle. Industrial touch screens and panels take either technology and add the environment: gloves, moisture, dust, temperature and panel mounting, with the serial line for equipment that already talks serial.

Mirror touch screens put a reflective finish on the touch surface, so the same surface acts as mirror and control, and the cover glass choice matters more there than anywhere else. Touch screen modules bundle touch, display and driver elements into one unit, for buyers who want the display subsystem to arrive matched rather than assembled from parts. Fully laminated modules bond the whole stack into one unit, and the bonding guide compares that option with frame lamination as a selection question.

Two process topics run across all lines. Bonding joins the layers, and the choice between full lamination and frame lamination trades readability and robustness against simplicity and repairability. Cover glass protects the sensor and sets the look, with shapes from round to irregular and AG, AR and AF treatments that control glare, reflections and fingerprints. Both topics have their own guide pages, and both should be confirmed together with the line itself, because a line specified without its glass and bonding is only half specified.

How buying works here

1. Describe the requirement. Send the category, the size class, the cover glass shape and treatment if known, the bonding preference, the controller interface, the operating environment and the quantity.
2. Confirm what is open. Say openly which points are not yet decided. An open question leads to a better specification than a guessed one, and the reply will identify what needs a custom discussion.
3. Confirm the commercial terms. Please confirm the minimum order quantity and the delivery schedule before payment, and ask for the certificates your project requires and confirm them before ordering.
4. Order against the agreed specification. Confirm the agreed specification in your order.

From the blog

Applications in plain terms

Touch screens from this site serve equipment and interfaces rather than consumer devices. The typical settings are control panels on machines, information terminals in public or commercial spaces, and equipment interfaces where the operator works with gloves or in wet, dusty or bright conditions. Those settings share one requirement: the screen must keep working in the real environment, not just on a desk.

Within those settings, the specification questions repeat: the panel size class and mounting method, the cover glass shape and treatment, the bonding method, the controller interface, and the operating environment in detail. A buyer who answers those questions for their own setting will receive a quotation that fits, whatever the setting is. A buyer who cannot yet answer them should say so, because the inquiry discussion exists to resolve exactly those points before any order is placed.

• Control panels on machines and production equipment
• Information terminals in commercial and public spaces
• Equipment interfaces operated with gloves or in wet conditions
• Enclosed panels where the screen must fit an existing opening

Cover glass and bonding at a glance

Cover glass is the first choice most buyers meet after the line itself. The company website lists cover glass in round, arc, polygonal, curved and irregular shapes, and the treatment follows the environment: anti-glare where bright light washes out the display, anti-reflective where reflections compete with the image, and anti-fingerprint where the surface is touched constantly. Naming the shape and the treatment in the inquiry gives the supplier something concrete to answer.

Bonding is the second choice. Full lamination joins the whole stack into one unit, which suits installations where readability and robustness matter most. Frame lamination leaves an air gap at the edges, which suits installations where simplicity and service access matter more. The bonding guide compares the two methods in full; the short version is that neither method wins in general, and the right one follows the installation.

The controller interface is the third choice that belongs in the same inquiry. Serial, USB and other interfaces each fit different host systems, and the driver board pages describe the board-level line for those systems. Naming the interface your equipment already uses avoids a mismatch between the panel and the host, and it lets the quotation discussion start from the system you have rather than from a generic panel.

• Confirm the cover glass shape for your installation
• Confirm the optical treatment for your lighting conditions
• Confirm full lamination or frame lamination
• Confirm the controller interface with the same inquiry

Questions buyers ask first

Read all frequently asked questions →